Metal roofing calculator
Estimate metal roof cost in CAD or USD by roof size, metal type, pitch, complexity, and waste. This page targets calculator intent; use the metal roof quote guide when the homeowner is ready for contractor follow-up.
CAD + USD
country/currency options visible to crawlers
$5-$16
common USD per sq ft metal planning range before complex seam work
C$13.7K+
Canadian exposed-fastener example range starts before GST/HST
Metal roofing commonly plans around $5-$16 USD per sq ft for many corrugated steel, metal shingle, and standing-seam systems before pitch, complexity, waste, and local scope. For Canadian roof cost searches, this calculator exposes CAD ranges directly: a 1,800 sq ft Canadian exposed-fastener steel example plans around C$13,700-C$27,400 CAD and standing seam around C$19,200-C$38,400 CAD before GST/HST, PST, permits, decking, or final contractor scope.
Formula: roof area x (1 + waste) x metal roof cost per sq ft x country multiplier x pitch multiplier x complexity multiplier = metal roof cost range. Cost per square equals cost per sq ft x 100 because one roofing square equals 100 sq ft.
Canada uses the same transparent planning approach as the metro cost study: CAD-visible ranges and a disclosed Canada planning factor. The calculator is not a substitute for a local contractor quote.
This page answers “metal roof cost calculator” and “steel roof cost per sq ft.” The metal roof quote page answers quote-request intent: what details a contractor needs before confirming scope.
Related tools and guides: roof cost calculator, roofing square calculator, metal roof vs shingles cost comparison, and the US and Canadian metro cost study.
Metal roof cost FAQ
In GeoQuote planning ranges, a 1,800 sq ft Canadian metal roof can model around C$13,700-C$27,400 CAD for exposed-fastener steel and around C$19,200-C$38,400 CAD for standing seam before GST/HST, PST where applicable, decking, permits, access, and final contractor scope.
Yes. Metal roofing usually costs more upfront than asphalt shingles because panel systems, clips or fasteners, trim, flashing, underlayment, and installation labor are more expensive. Metal can still be attractive when lifespan, snow shedding, appearance, or long-term maintenance matter.
Steel roofing often plans around $5-$12 USD per sq ft for corrugated or exposed-fastener systems and around $9-$16 USD per sq ft for standing seam before roof-specific multipliers. Canadian planning ranges should be shown in CAD and should disclose GST/HST and local scope exclusions.
A roofing square is 100 sq ft. At $9-$16 USD per sq ft, standing seam metal roofing plans around $900-$1,600 USD per square before pitch, complexity, waste, and local adjustments. In Canada, the same planning model should show CAD per-square figures.